Abnormal quality detection and isolation in water distribution networks using simulation models

This paper proposes a model based detection and localisation method to deal with abnormal quality levels based on the chlorine measurements and chlorine sensitivity analysis in a water distribution network. A fault isolation algorithm which correlates on line the residuals (generated by comparing the available chlorine measurements with their estimations using a model) with the fault sensitivity matrix is used. The proposed methodology has been applied to a District Metered Area (DMA) in the Barcelona network

Time to match; when do homologous chromosomes become closer?

Acord transformatiu CRUE-CSICAltres ajuts: Universitat Autònoma de Barcelona CF-180034, CERCA Programme/Generalitat de Catalunya, PIF UABIn most eukaryotes, pairing of homologous chromosomes is an essential feature of meiosis that ensures homologous recombination and segregation. However, when the pairing process begins, it is still under investigation. Contrasting data exists in Mus musculus, since both leptotene DSB-dependent and preleptotene DSB-independent mechanisms have been described. To unravel this contention, we examined homologous pairing in pre-meiotic and meiotic Mus musculus cells using a three-dimensional fluorescence in situ hybridization-based protocol, which enables the analysis of the entire karyotype using DNA painting probes. Our data establishes in an unambiguously manner that 73.83% of homologous chromosomes are already paired at premeiotic stages (spermatogonia-early preleptotene spermatocytes). The percentage of paired homologous chromosomes increases to 84.60% at mid-preleptotene-zygotene stage, reaching 100% at pachytene stage. Importantly, our results demonstrate a high percentage of homologous pairing observed before the onset of meiosis; this pairing does not occur randomly, as the percentage was higher than that observed in somatic cells (19.47%) and between nonhomologous chromosomes (41.1%). Finally, we have also observed that premeiotic homologous pairing is asynchronous and independent of the chromosome size, GC content, or presence of NOR regions

Reduced salivary oxytocin after an empathic induction task in Intimate Partner Violence perpetrators: Importance of socio-affective functions and its impact on prosocial behavior

Intimate Partner Violence (IPV) has been linked to difficulties in socio-affective functions. Nevertheless, the underlying psychobiological mechanisms that might be responsible for them remain unclear. Oxytocin (OXT) stands out as an important hormone that may favor the salience of social information, due to its relevance in empathy and prosocial behavior. Thus, the study of salivary OXT (sOXT) may provide further information about potential impairments in social cognition in IPV perpetrators. This study analyzed the effects of an empathic induction task, performed through negative emotion-eliciting videos, on endogenous sOXT levels, mood state, and emotional perception in 30 IPV perpetrators compared to 32 controls. Additionally, we explored their performance on prosocial behavior after the empathic induction task, using Hare''s donation procedure. Lower sOXT levels were found in IPV perpetrators after the task compared to controls, along with a general decreasing tendency in their sOXT levels. Additionally, IPV perpetrators exhibited no change in their mood state and perceived others'' emotions as more positive and less intense. Moreover, the mood state response and alexithymia traits, respectively, positively and negatively predicted the sOXT levels after the empathic induction task in the entire sample. Finally, we did not observe a lower appearance of prosocial behaviors in IPV perpetrators; however, higher sOXT levels after the empathic induction task were found in subjects who donated when considering the whole sample. In sum, IPV perpetrators exhibited differences in their sOXT levels when empa-thizing, compared to controls, with alexithymia and the emotional response potentially explaining the sOXT levels after the task. Furthermore, prosocial behavior was more related to these sOXT levels than to IPV. As our knowledge about the emotional processing of IPV perpetrators increases, we will be better able to develop and include coadjutant treatments in current psychotherapeutic programs, in order to focus on their emotional needs, which, in turn, would reduce the future risk of recidivism

Double excitation transitions in Mn2+ -doped alkali halides

4 págs.; 4 figs.It is shown in this work that the room-temperature excitation spectra of as-grown crystals of LiF, NaF, NaCl, KCl, and KBr doped with Mn2+ reveal the existence of double excitation peaks. These peaks are related to the formation of precipitated phases containing Mn2+ in the alkali halide lattice. In the case of LiF:Mn2+ the position of the [A14(G), E4(G)] and T14(G) peaks suggests an anomalously small Mn2+- F- distance for the precipitated phase. © 1983 The American Physical Society.Financial support by the Comision Asesora para la Investigacion Cientifica y Tecnica, is gratefully acknowledged.Peer Reviewe

The use of the SeDeM diagram expert system for the formulation of Captopril SR matrix tablets by direct compression

The SeDeM Diagram Expert System has been used to study excipients, Captopril and designed formulations for their galenic characterization and to ascertain the critical points of the formula affecting product quality to obtain suitable formulations of Captopril Direct Compression SR Matrix Tablets. The application of the Sedem Diagram Expert System enables selecting excipients with in order to optimize the formula in the preformulation and formulation studies. The methodology is based on the implementation of ICH Q8, establishing the design space of the formula with the use of experiment design, using the parameters of the SeDeM Diagram Expert System as system responses

Mesh management methods in finite element simulations of orthodontic tooth movement

In finite element simulations of orthodontic tooth movement, one of the challenges is to represent long term tooth movement. Large deformation of the periodontal ligament and large tooth displacement due to bone remodelling lead to large distortions of the finite element mesh when a Lagrangian formalism is used. We propose in this work to use an Arbitrary Lagrangian Eulerian (ALE) formalism to delay remeshing operations. A large tooth displacement is obtained including effect of remodelling without the need of remeshing steps but keeping a good-quality mesh. Very large deformations in soft tissues such as the periodontal ligament is obtained using a combination of the ALE formalism used continuously and a remeshing algorithm used when needed. This work demonstrates that the ALE formalism is a very efficient way to delay remeshing operations

Efficient and reliable nonlocal damage models

We present an efficient and reliable approach for the numerical modelling of failure with nonlocal damage models. The two major numerical challenges––the strongly nonlinear, highly localized and parameter-dependent structural response of quasi-brittle materials, and the interaction between nonadjacent finite elements associated to nonlocality––are addressed in detail. Reliability of the numerical results is ensured by an h-adaptive strategy based on error estimation. We use a residual-type error estimator for nonlinear FE analysis based on local computations, which, at the same time, accounts for the nonlocality of the damage model. Efficiency is achieved by a proper combination of load-stepping control technique and iterative solver for the nonlinear equilibrium equations. A major issue is the computation of the consistent tangent matrix, which is nontrivial due to nonlocal interaction between Gauss points. With computational efficiency in mind, we also present a new nonlocal damage model based on the nonlocal average of displacements. For this new model, the consistent tangent matrix is considerably simpler to compute than for current models. The various ideas discussed in the paper are illustrated by means of three application examples: the uniaxial tension test, the three-point bending test and the single-edge notched beam test.Peer ReviewedPostprint (author’s final draft

Gaia Focused Product Release: A catalogue of sources around quasars to search for strongly lensed quasars

Context. Strongly lensed quasars are fundamental sources for cosmology. The Gaia space mission covers the entire sky with the unprecedented resolution of $0.18$" in the optical, making it an ideal instrument to search for gravitational lenses down to the limiting magnitude of 21. Nevertheless, the previous Gaia Data Releases are known to be incomplete for small angular separations such as those expected for most lenses. Aims. We present the Data Processing and Analysis Consortium GravLens pipeline, which was built to analyse all Gaia detections around quasars and to cluster them into sources, thus producing a catalogue of secondary sources around each quasar. We analysed the resulting catalogue to produce scores that indicate source configurations that are compatible with strongly lensed quasars. Methods. GravLens uses the DBSCAN unsupervised clustering algorithm to detect sources around quasars. The resulting catalogue of multiplets is then analysed with several methods to identify potential gravitational lenses. We developed and applied an outlier scoring method, a comparison between the average BP and RP spectra of the components, and we also used an extremely randomised tree algorithm. These methods produce scores to identify the most probable configurations and to establish a list of lens candidates. Results. We analysed the environment of 3 760 032 quasars. A total of 4 760 920 sources, including the quasars, were found within 6" of the quasar positions. This list is given in the Gaia archive. In 87\% of cases, the quasar remains a single source, and in 501 385 cases neighbouring sources were detected. We propose a list of 381 lensed candidates, of which we identified 49 as the most promising. Beyond these candidates, the associate tables in this Focused Product Release allow the entire community to explore the unique Gaia data for strong lensing studies further.Comment: 35 pages, 60 figures, accepted for publication by Astronomy and Astrophysic

Gaia Focused Product Release: Radial velocity time series of long-period variables

The third Gaia Data Release (DR3) provided photometric time series of more than 2 million long-period variable (LPV) candidates. Anticipating the publication of full radial-velocity (RV) in DR4, this Focused Product Release (FPR) provides RV time series for a selection of LPVs with high-quality observations. We describe the production and content of the Gaia catalog of LPV RV time series, and the methods used to compute variability parameters published in the Gaia FPR. Starting from the DR3 LPVs catalog, we applied filters to construct a sample of sources with high-quality RV measurements. We modeled their RV and photometric time series to derive their periods and amplitudes, and further refined the sample by requiring compatibility between the RV period and at least one of the $G$, $G_{\rm BP}$, or $G_{\rm RP}$ photometric periods. The catalog includes RV time series and variability parameters for 9\,614 sources in the magnitude range $6\lesssim G/{\rm mag}\lesssim 14$, including a flagged top-quality subsample of 6\,093 stars whose RV periods are fully compatible with the values derived from the $G$, $G_{\rm BP}$, and $G_{\rm RP}$ photometric time series. The RV time series contain a mean of 24 measurements per source taken unevenly over a duration of about three years. We identify the great most sources (88%) as genuine LPVs, with about half of them showing a pulsation period and the other half displaying a long secondary period. The remaining 12% consists of candidate ellipsoidal binaries. Quality checks against RVs available in the literature show excellent agreement. We provide illustrative examples and cautionary remarks. The publication of RV time series for almost 10\,000 LPVs constitutes, by far, the largest such database available to date in the literature. The availability of simultaneous photometric measurements gives a unique added value to the Gaia catalog (abridged)Comment: 36 pages, 38 figure